Collections
About This Design
Lace Edge Glitter Font is an appliqué alphabet designed to add a delicate lace-trim effect with a glitter-ready look. This appliqué font works great for lace edge applique, glitter font embroidery, appliqué alphabet monogram, and girl monogram applique projects. Available in PES, DST, EXP, VIP, HUS, XXX, JEF and VP3 formats, sizes include 2", 2.6", 3.1" and 3.8". Each letter uses a compact 5318-stitch layout in three colors, making it ideal for kidswear, vinyl/HTV layering, and personalized gifts that need a refined, sparkly finish.
Best For
Machine Embroidery Design Details
Lace Edge Glitter Font is available in hoop sizes 2in, 2.6in, 3.1in, 3.8in, compatible with Brother, Janome, Singer, Bernina, Baby Lock and other machines via PES, DST, EXP, VIP, HUS, XXX, JEF, VP3, uses 3 thread colors, approximately 5,318 stitches.
What Is Included
- Embroidery design files: PES, DST, EXP, VIP, HUS, XXX, JEF, VP3
- Design sizes: 2in, 2.6in, 3.1in, 3.8in
- Compatible hoops: 4x4, 5x7, 6x10
- Design contents: uppercase, numbers, punctuation
- Instant digital download — no physical item shipped
- Color sequence / thread color guide included
Perfect For
How to Stitch This Design
- Download and unzip your files (see How to unzip and Instructions pages) and choose the desired format (PES, DST, EXP, VIP, HUS, XXX, JEF, VP3).
- Select the design size to match your project: available sizes are 2", 2.6", 3.1" and 3.8" and compatible hoops are 4x4, 5x7, 6x10.
- Thread and color setup: the design uses 3 colors and a stitch count of 5318—load stabilizer, base thread and applique fabric or HTV layer accordingly.
- Appliqué step: hoop stabilizer, stitch placement, lay applique fabric or HTV, tack down, trim excess, then run the cover satin/applique finish stitch.
- Finishing: trim close to the tack, press gently, and apply any glitter vinyl or heat-seal layer if using HTV; test one letter first for placement and finish.
Embroidery Machines Supported
Works with all major home embroidery machines that accept standard formats.
Design Preview
Similar Designs
FAQ
What embroidery machines work with this design?
Files are included in PES, DST, EXP, VIP, HUS, XXX and JEF, VP3 formats and are compatible with most home and commercial machines from Brother, Janome, Singer, Bernina and other multi-format readers.
How does the appliqué process work with this font?
Each letter uses appliqué placement followed by a cover/satin stitch; the design is compact (5318 stitches) and set up for a three-color sequence to secure and finish the lace-edge applique.
What hoop sizes fit this design?
Design sizes are 2", 2.6", 3.1" and 3.8" and the files fit in 4x4, 5x7 and 6x10 hoops—choose the size that best suits your placement and project area.
Is this design suitable for beginners?
Yes. With only three colors and a moderate stitch count of 5318, the appliqué steps are straightforward and well-suited to beginners with basic hooping and trimming experience.
