Collections
About This Design
Fall Turkey Bow in-the-hoop is a 3D feltie embroidery design ideal for seasonal decorating and kids' accessories. This turkey feltie ITH file comes in PES, DST, EXP, VIP, HUS, XXX, JEF and VP3 formats and includes sizes 3.5, 4.5, 5 and 5.5 inches. The design uses 5 thread colors and 10,147 stitches to create a sturdy 3D bow that works great as a hair clip, thanksgiving keychain embroidery piece, or farm-themed party favor. Search phrases like fall turkey bow, turkey applique, 3D ITH bow, and feltie bow embroidery describe this playful, quick-to-stitch project.
Best For
Machine Embroidery Design Details
Fall Turkey Bow 3D ITH is available in hoop sizes 3.5in, 4.5in, 5in, 5.5in, compatible with Brother, Janome, Singer, Bernina, Baby Lock and other machines via PES, DST, EXP, VIP, HUS, XXX, JEF, VP3, uses 5 thread colors, approximately 10,147 stitches.
What Is Included
- Embroidery design files: PES, DST, EXP, VIP, HUS, XXX, JEF, VP3
- Design sizes: 3.5in, 4.5in, 5in, 5.5in
- Compatible hoops: 4x4, 5x7, 6x10, 8x8
- Instant digital download — no physical item shipped
- Color sequence / thread color guide included
Perfect For
How to Stitch This Design
- Download the included PES, DST, EXP, VIP, HUS, XXX, JEF and VP3 files and unzip using Artapli's How to unzip guide.
- Select the design size you want (3.5", 4.5", 5", 5.5") and pick a compatible hoop: 4x4, 5x7, 6x10 or 8x8 depending on chosen size.
- Load threads and fabrics: the design uses 5 colors and a total stitch count of 10,147; prepare matching felt and stabilizer.
- Stitch the in-the-hoop construction: hoop felt and stabilizer, run placement and tack-down steps, insert felt layers as prompted to build the 3D bow.
- Finish by trimming jump threads, releasing the felt from the hoop, and attaching a clip, key ring or sewing the bow onto your project.
Embroidery Machines Supported
Works with all major home embroidery machines that accept standard formats.
Design Preview
More From These Collections
Fall
See all →
Keychains
See all →
Thanksgiving
See all →
In The Hoop
See all →
Bows
See all →
FAQ
What embroidery machines work with this design?
Files include PES, DST, EXP, VIP, HUS, XXX, JEF and VP3 formats so they are compatible with most home machines and commercial units (Brother, Janome, Singer, Bernina, Husqvarna Viking, Pfaff, Babylock, etc.).
How do I stitch the 3D in-the-hoop bow?
This in-the-hoop design builds layered felt pieces inside the hoop; it uses 5 colors and 10,147 stitches and will sequentially stitch placement, tack-downs and finishing steps to form the 3D bow.
What hoop sizes fit this design?
Design sizes are 3.5", 4.5", 5" and 5.5" and the files are sized to fit compatible hoops: 4x4, 5x7, 6x10 and 8x8.
Is this design beginner-friendly?
This is an intermediate in-the-hoop project; basic hooping and felt handling skills are helpful, but careful following of the instructions will guide confident beginners through the 3D assembly.
