Collections
About This Design
Patchwork USA Flag In-the-Hoop Embroidery Design brings a patriotic patchwork alphabet straight to your machine. This patchwork usa flag font includes uppercase, lowercase, numbers and punctuation in sizes 0.8, 1, 1.3, 1.6, 2, 2.5 and 3in, stitched with 5 colors and sized for a 4x4 hoop. Use the USA flag embroidery font, patchwork font embroidery, or in-the-hoop monogram font to create clean outline initials and patterned letters. Files are provided in PES, DST, EXP, VIP, HUS, XXX, JEF and VP3 for wide machine compatibility and fast instant downloads.
Best For
Machine Embroidery Design Details
Patchwork USA Flag Patterned Font is available in hoop sizes 0.8in, 1in, 1.3in, 1.6in, 2in, 2.5in, 3in, compatible with Brother, Janome, Singer, Bernina, Baby Lock and other machines via PES, DST, EXP, VIP, HUS, XXX, JEF, VP3, uses 5 thread colors, approximately 4,201 stitches.
What Is Included
- Embroidery design files: PES, DST, EXP, VIP, HUS, XXX, JEF, VP3
- Design sizes: 0.8in, 1in, 1.3in, 1.6in, 2in, 2.5in, 3in
- Compatible hoops: 4x4
- Design contents: uppercase, lowercase, numbers, punctuation
- Instant digital download — no physical item shipped
- Color sequence / thread color guide included
Perfect For
How to Stitch This Design
- Download the ZIP, unzip following Artapli instructions (see How to unzip) and transfer PES/DST/EXP/VIP/HUS/XXX/JEF/VP3 to your machine.
- Select the letter size needed from available design sizes: 0.8in, 1in, 1.3in, 1.6in, 2in, 2.5in or 3in and hoop fabric in a 4x4 hoop.
- Use up to 5 thread colors as provided; total stitch count per character averages within the design’s 4201-stitch density, adjust thread choices as desired.
- Stitch in-the-hoop: follow the layered sequence for the patchwork outline and patterned fill — trims and tack-downs are done by the machine during the run.
- Finish by removing from hoop, trim jump threads, press lightly from the back and apply stabilizer cleanup or backing as needed.
Embroidery Machines Supported
Works with all major home embroidery machines that accept standard formats.
Design Preview
More From These Collections
BX Fonts
See all →
4th of July
See all →
Monogram Fonts
See all →
Pattern Fonts
See all →
In The Hoop
See all →
FAQ
What embroidery machines work with this design?
Files are provided in PES, DST, EXP, VIP, HUS, XXX, JEF and VP3 formats and work with most home and commercial machines including Brother, Janome, Singer, Bernina, Husqvarna Viking and Babylock models that accept these formats.
How does the in-the-hoop font work?
This is an in-the-hoop alphabet with uppercase, lowercase, numbers and punctuation; each letter is digitized at a stitch count around the design’s 4201 density and uses the included 5-color patchwork fill for a patterned effect.
What hoop sizes fit this design?
Design sizes available are 0.8in, 1in, 1.3in, 1.6in, 2in, 2.5in and 3in and the set is sized to fit a 4x4 hoop.
Is this design suitable for beginners?
Yes—basic in-the-hoop font users will find it approachable; smaller sizes may require careful fabric stabilization, while the single-file workflow and 5-color sequence keep stitching straightforward.
