About This Design
Fringed Hedgehog Fringe Embroidery Design celebrates a tiny fluffy hedgehog in freestanding lace. This fringed hedgehog embroidery is perfect for hedgehog earrings embroidery, freestanding lace hedgehog charms, and a fringe FSL hedgehog design for kids' accessories. The file stitches at 5722 stitches, uses 4 colors and is sized at 1.4in to fit a 4x4 hoop. Delivered in common machine formats, the design stitches as an in-the-hoop charm ready to trim and wash away the soluble stabilizer for soft, feathery fringe.
Best For
Machine Embroidery Design Details
Fringed Hedgehog Earrings FSL is available in hoop sizes 1.4in, compatible with Brother, Janome, Singer, Bernina, Baby Lock and other machines via PES, DST, EXP, VIP, HUS, XXX, JEF, VP3, uses 4 thread colors, approximately 5,722 stitches.
What Is Included
- Embroidery design files: PES, DST, EXP, VIP, HUS, XXX, JEF, VP3
- Design sizes: 1.4in
- Compatible hoops: 4x4
- Instant digital download — no physical item shipped
- Color sequence / thread color guide included
Perfect For
How to Stitch This Design
- Download and unzip the included PES, DST, EXP, VIP, HUS, XXX, JEF or VP3 files following Artapli’s unzip instructions.
- Use a 4x4 hoop and set machine to the 1.4in design size (5722 stitches total).
- Load threads for the 4 colors indicated; follow color stops in your format for sequence.
- Stitch on water-soluble stabilizer (FSL) and trim the fringe carefully after the fringe step but before final tack-down.
- Rinse away soluble stabilizer, gently block and dry the freestanding lace, then attach earring findings or jump rings.
Embroidery Machines Supported
Works with all major home embroidery machines that accept standard formats.
Design Preview
More From These Collections
Lace Embroidery
See all →
In The Hoop
See all →
Earrings
See all →
Fringe
See all →
FAQ
What embroidery machines work with this design?
This design is provided in PES, DST, EXP, VIP, HUS, XXX, JEF and VP3 formats and is compatible with major machines and brands such as Brother, Janome, Singer, Bernina, Viking/Pfaff and Babylock (check your machine’s supported formats).
How do I get the best fringe effect with this design?
Stitch the design on water-soluble stabilizer, trim carefully after the fringe stitching step, then rinse the stabilizer away. The 5722-stitch file and 4 color stops are sequenced to create layered, fluffy fringe before the final tack-down.
What hoop sizes fit this design?
This design is sized at 1.4in and fits a 4x4 hoop (compatible with standard 4x4/100mm hoops).
Is this design suitable for beginners?
The small 1.4in size and single-file delivery make it approachable, but working with freestanding lace and fringe requires careful trimming and use of water-soluble stabilizer, so beginners should proceed slowly or practice on scrap stabilizer first.
